Hempel Pro Filler is a two-component, lightweight epoxy filler, featuring high adhesion and water resistance, when fully cured is easy to sand.
Can be applied in coats up to 10-12 mm for a uniform smooth film build.
Application Methods : Spatula / Spreader
Temp | Pot Life | Recoat (min/max) |
|
20°c | 45 mins | 8 hrs - none (after sanding) |
Recommended use:
As a filler and fairing compound, especially suitable for profiling large areas and detailed fairing where structural strength is important.
It can be used on most primed rigid substrates, above and below the waterline.
For further information on technical and safety information please refer to files provided in the technical and safety tab above