AMPRO™ LOW TEMPERATURE CURING MULTIPURPOSE SYSTEM
- For bonding, laminating & filling wood & GRP
- SP 106 re-engineered, with improved health & safety
- 3 : 1 mix ratio by volume
- Available with Fast, Slow hardeners
- No surface residue after cure
AMPRO™ is a simple to use, all-purpose epoxy which can be used for gluing, coating, laminating and filling. With its fast, low temperature curing hardener and easy 3:1 mix ratio by volume, AMPRO™ provides a quick and convenient way of using one epoxy system for a very wide range of tasks.
AMPRO™ has been built on the well-established SP 106 which has been the primary epoxy system for the manufacture and repair of wooden boats for over 20 years.
By using the Gurit range of filler powders, an AMPRO™ Resin & AMPRO™ Fast Hardener mix can be turned into a very effective adhesive or filling compound. Details of this filler range, and how to use them, are contained in a separate information sheet (Filler Guide) and typical filling and fairing mixes (resin / hardener / filler) are shown in this data sheet
| Ampro Resin (20°C) | Slow Hardener (20°C) | Fast Hardener (20°C) |
| Mix Ratio By Volume | 3 : 1 | 3 : 1 |
| Pot Life | 1 hr 20 mins | 36 mins |
| Thin Film Gel Time | 2 hrs 25 mins | 1 hr 44 mins |
| Tack Off Time | 4 hrs | 2 hrs 50 mins |
| Coating / Sand Time | 16 hrs | 12 hrs |
| Colour - Mixed | Light Amber | Light Amber |
| Density - Mixed (g/cm3) | 1.12 | 1.11 |
| Viscosity - Mixed | 800 cP | 1000 cP |
Resins and hardeners use universal containers for various kit sizes and are supplied by weight, while the supplied containers may not be full, they will contain the correct amount of both resin and hardener according to the listing.
