Pre-accelerated, thixotropic viscosity polyester resin with low styrene emission. Its rapid wet-out, low exotherm and fast hardening characteristics make it ideal for spray applications which require a fast mould turn round. This reduction in styrene emission is achieved with no loss of intermalinar adhesion.
Should be allowed to attain workshop temperatures (18°c - 20°c) before use. They need only the addition of a catalyst to start the curing reaction. A colour change mechanism is incorporated to indicate the presence of catalyst.
| Parts of Catalyst M (or Butanox M50) to 100 parts Resin | 1.0 | 2.0 |
| Pot Life in Minutes at 15°C | 62 | 41 |
| Pot Life in Minutes at 20°C | 39 | 29 |
| Pot Life in Minutes at 25°C | 25 | 20 |
Please note - Polyester resins are best used within six months from date of purchase.
*Although this product is described as Clear, it is infact translucent blue in colour, The term 'Clear' is a grp industry standard as it is an non pigmented material, This does not create a completely translucent or water clear effect.*
