DESCRIPTION:
PlatSil Gel series is an advanced prosthetic grade silicone rubber. It is a two-part platinum silicone system with a mix ratio of 1:1. It also has a very fast set and de-mould time. PlatSil Gel Silicone Rubbers are the industry standard in the special effects industry for creating life-like theatrical prosthetic appliances for film, television and theatre to fabricate realistic body parts such as wounds, masks, scars, prosthetic appliances, life casting and prop making.
FEATURES
- Soft
- Prosthetic Grade
- Fast Set & Demould Time
- Creates life like prosthetic's
- Exceptional for wounds, scars & masks
| PlatSil Gel 25 | Unit |
| Cured Colour | Milky White |
| Mix Ratio | 1A : 1B |
| Pot Life 200g @ 20°c | 5 mins |
| Demould Setting Time | 60 Mins |
| Shore A | A25 |
| Mixed Viscosity (cP) | 3500 |
| Specific Gravity @ 23°C | 1.1 |
| Shrinkage Upon Cure | Nil |
Before use, be sure that Parts A and B are at room temperature and tools and moulds or models are ready to go. Surfaces and air temperature should be above 60°F during application and for the entire curing period. Use plastic mixing vessels and spatulas to avoid introducing moisture (i.e.., with paper or wood tools).
Measure equal weights of part A and part B into a mixing container such as a polyethylene pail. Mix immediately, thoroughly scraping sides and bottom for one minute. Once the containers of Parts A and B are opened, they should be used or resealed tightly as atmospheric moisture contamination.
.jpg)
.jpg)
.jpg)
.jpg)
