Kit Contents
1 x 5.5kg Polycraft GP-3481-F RTV Condensation Cure Mould Making Silicone Rubber
1 x 10kg Polycraft SG2000 Paintable Fast Cast Polyurethane Liquid Plastic Casting Resin
4 x 600ml Clear Calibrated Plastic Mixing Cup
3 x Pair Lightly Powdered Latex Gloves
1 x 10pk Small Wooden Mixing Sticks
Using this kit you can just about cast any original part including figures, small sculptures, figurines, scenario models or even engineering components or use them to create just about anything required in the moulding making industry, engineers can use the process as part of their rapid prototyping work whilst artists can easily make copies of their original work as samples or demonstration pieces.
With the original part removed from the silicone the mould can then be used to create accurate and detailed reproductions of the original part by pouring mixed casting resin into the mould. The resin included in the kit is a very easy to use Fast Cast polyurethane resin which will flow easily into the fine surface details of the silicone mould and then cure quickly (within an hour) to a strong plastic copy of the original part.
High strength silicone mould making rubber. Our silicone has been formulated for easy mixing by hand, with colour coded components, giving a visual aid to ensure mixing is adequate. The two components mix easily and because of the low viscosity most grades can be used without processing in a vacuum chamber. This silicone is suited for the detailed reproduction of figures, art objects and similar items.
Applications include : Patterns, Negatives, Castings, Models, Vacuum forming tools, prototypes etc.
| Silicone GP-3481-F | SG2000 PU Casting Resin |
| Mix Ratio (By Weight) | 10 : 1 | 1 : 1 |
| Working Time (Minutes) | 40 - 60 | 2.5 - 3.5 |
| Curing Times @ 25°C | 6 - 8 Hours | 15 - 20 Minutes |
| Cured Colour | Light Pink | Ivory / Off White |
| De-Mould Time @ 25°C | 12 - 24 Hours | 30 - 60 Minutes |
| Mixed Viscosity | 18000 | 50±5 |
| Hardness Shore | A 27 | D 72±2 |
| Tensile Strength (Mpa) | 3.0 | |
| Elongation @ Break % | 520 | |
| Tear Strength (kN/m) | 23 | |
| Linear Shrinkage | 0.2-0.4 | |
- Instructions & datasheet downloads available under Technical & Safety Sheets tab.
- Please note this silicone is not suitable for food use.
- It is also not suitable for direct use on skin.
Base and catalyst use universal containers for various kit sizes and are supplied by weight, while the supplied containers may not be full, they will contain the correct amount of both base and hardener according to the listing. At point of packaging and dispatch lids may be taped to prevent damage or spillage during transportation.
