A single component traditional varnish produced from the highest quality materials, including tung oil. Use inside and outside above the waterline. Excellent flow at application, a flexible finish and long term UV filters ensure an uncompromising finish that will last for a long time.
Minimum Application Temperature : 5°c
Application Methods : 
| Temp | Touch Dry | Recoat (min/max) | Thinners / Tool Cleaner | Coverage |
| 10°c | 20 hrs | 20 hrs - 4 days | Thinners No 1 | 17 m2/ltr |
| 20°c | 10 hrs | 10 hrs - 2 days | | 17 m2/ltr |
Surface Preparation
Preparation: Always ensure all surfaces are clean, oil free and dry. Clean the surface and remove possible oil and grease with a suitable detergent and sand with dry abrasive paper. It is recommended to apply a suitable wood treatment to new wood before coating
New wood: Sand and remove all dust. Saturate the dry, clean surface with suitable wood treatment, allow to dry. Plywood: Sand and remove all dust. Seal the dry clean surface with suitable wood sealer.
Teak: Degrease the surface thoroughly with a suitable degreaser. Previously damaged varnished wood: Wood treatment may be necessary. Previously varnished wood: Abrade, clean and dry the surface
For further information on technical and safety information please refer to files provided in the technical and safety tab above
