CALL US NOW:028 90 861992
MON-THU 8:30AM - 5:00PM , FRI 8:30AM - 3:30PM

Jesmonite AC730 Powders

£18.00
(Inc. 20% VAT)
(£15.00 Exc. VAT)
Earn 18 Loyalty Points
Bath Stone
Charcoal
Natural
Old Terracotta
Portland Stone
Silver Grey Granite
White Marble
Yellow Sandstone
Size
Quick Link Code
QL5068
Brand
Jesmonite

*Image(s) For Illustration Purpose Only

Information

Jesmonite AC730

Jesmonite AC730 is a rapid setting acrylic modified cementitious composite. The system is designed for glass reinforced decorative structures, and can also be used for small castings. It is shrinkage compensated material of low permeability and is durable in all conditions of external weathering including water features. The compound has a reduced free-lime content, and is of low alkalinity, leading to major reductions in efflorescence in comparison with ordinary Portland cement systems. The material contains a fine decorative aggregate and powder pigments, carefully controlled to give a consistent decorative surface finish after treatment with a proprietary brick cleaner or acid etch. AC730 is available in several stone finishes; Natural Stone, Bath Stone, Yellow Sand Stone, White Marble, Portland Stone, Silver Grey Granite, Marigold, Cotswold Honey, Charcoal, Old Terracotta and Brick Red

Application Areas
Glass reinforced decorative architectural mouldings, and small castings. Glass reinforcements such as Jesmonite Quadaxial fabric or 13mm Glass Chopped Strands can be utilised for lightweight, high-impact panels. It can also
be used to create Garden ornaments and statuary, and is suitable for water-feature
 
Jesmonite AC730 Unit
Mix Ratio By Weight 5 Powder : 1 Liquid
Wet Density 1950 kg/mᵌ
Dry Density 1850 kg/mᵌ
Water Uptake / Porosity 2.26%
Freeze / Thaw Resistance 300 Cycles (Normal Max 56 Cycles)
Compressive Strength 58 Mpa (N/mm²)
Drying Shrinkage 0.1%
Impact Strength (Charpy) 5.0 - 10.1 MPa
Flexural Strength LOP 8.9 Mpa - MOR 23.6 Mpa


Powder Only

Jesmonite offer a shelf life of 6 months from date of production on the containers, however with the processes involved from production date to delivery from the manufacture to MB Fibreglass its not uncommon for the materials to have 3 to 4 months of a shelf life left on the goods on arrival. With an allowance for stocking the goods at MBFG there will be occasions that the materials may only have 3 months of shelf life left. If for any reason kits are left with a shorter than 3 month shelf life we will make contact to discuss suitability of the products remaining shelf life before dispatch.

Technical & Safety Sheets
Reviews

Be the first to Write a Review for this item!