2lb Block (906g) - As an indication each block is roughly the size of a large block of butter.
NSP is a sulfur-free, somewhat tougher, waxier, sculpting Plasteline, used widely in Fine Arts and Special Effects. Can be melted and poured at approximately 185º F.
Each type of Chavant Fine Art Sculpting Clay, also known as Plasteline, is suitable for all educational levels and professional sculptors in the Fine Art, Special Effect and Product Design industries. Personal opinion generally dictates choice and clients appreciate the variety of materials. All will meet requirements for detail retention and surface development. Blocks are each individually wrapped.
Chavant has an ultra smooth formulation that features a low melt temperature and a low tack feel that will not stick to tools or fingers. Chavant has high plasticity and has a unique elastic quality much like soft taffy when warm.
At average room temperature Chavant is firm enough to capture even the finest details and can be re-used and re-melted indefinitely. Chavant melts easily to a pourable consistency and is great for making copies of life casts where changes are needed.
This sulphur free recipe is compatible with platinum silicone moulding compounds. Buy it once and re-use it over and over again.
- Very low melt point
- Very firm making it perfect for detail and textures.
- Low tack, helping to keep your fingers and tools clean
- Sulphur Free - therefore compatible with platinum based silicone compounds
- Non-Polymerizing/Non-Oxidizing Formula and will not become brittle or dry out
| | Soft | Medium | Hard |
| Durometer | 24A | 33A | 51A |
| Softening Temperature | 120°F / 49°C | 125°F / 52°C | 130°F / 54°C |
| Troweling Temperature | 175°F / 80°C | 175°F / 80°C | 175°F / 80°C |
| Brushing Temperature | 185°F / 85°C | 185°F / 85°C | 185°F / 85°C |
| Casting Temperature | 205°F / 97°C | 205°F / 97°C | 205°F / 97°C |
| Max Temperature | 205°F / 97°C | 205°F / 97°C | 205°F / 97°C |
Hygiene
Wash hands with soap and water after use.
Handling Tips
NSP™ clay scrapers and rake tools are often used to initially make the clay surface uniform. NSPTM is very solvent friendly; solvents such as naphtha, clear mineral spirits and turpentine are aggressive solvents which can be used to quickly soften and dissolve the surface. Citrus based solvents such as D-limonene can also be used but may cause inhibition when molding the clay using silicone rubber. 99% Isopropyl alcohol can be used to smooth the clay surface if a less aggressive solvent effect is desired.
NOTE: If isopropyl myristate is used on the surface of NSP™, the surface will remain soft, and it will not return to the original hardness.
.jpg)
