Bilge & Locker paint is a single component high opacity satin topcoat that provides excellent durability. Good water and oil resistance for bilges and lockers.
Not suitable for permanent immersion.
Minimum Application Temperature : 5°c
Application Methods :
Temp | Touch Dry | Recoat (min/max) | Thinners / Tool Cleaner | Coverage |
10°c | 6 hrs | 16 hrs -10 Days | Thinners No: 1 (Brush) | 12m2/ltr |
20°c | 3 hrs | 8 hrs - 5 Days | Thinners No: 3 (Spray) | 12m2/ltr |
Available Colours*:
Preparation & Application :
Ensure all surfaces are clean, oil free and dry.
Previously Coated Surface
Abrade to remove any loose matter and provide a suitable key. Wash surface with fresh water and allow to dry. Apply 2 coats of Bilge & Locker
Previously Uncoated Surface
Prepare and prime surface with appropriate primer as per specification*. Once primed apply 2 coats of Bilge & Locker thinned 5-10% followed by 2-3 coats undiluted.
*Apply one coat of Bilge & Locker thinned with 20% followed by a second coat of Bilge & Locker thinned to 5-10%
For further information on technical and safety information please refer to files provided in the technical and safety tab above
*The colour's shown should be used as a guide only due to the varying degrees in monitor colour management